Hint 1
You don't need to make any cuts on the left side of the board.
This wooden board is oddly shaped and difficult to work with.
The best solution would be to cut it into two pieces that form a square when they are combined.
However, the grain of the wood means that the two pieces can't be flipped or rotated after being cut.
Draw lines where the board needs to be cut, then touch <CR>Submit</C>.

You don't need to make any cuts on the left side of the board.
The gap is three squares long. In order to fill it, you need to find a place from which you can cut a piece of the same shape.
Find a shape containing the protrusion on the right that you can cut out to fill this three-square gap.
You actually need to make two separate cuts to get the correct piece: a short, one-square line and a longer, four- square line that turns twice.
Once you've made the correct cuts, shift your piece one square up and two squares to the left and it will fit right in and make a square!
The top square of the L-shaped protrusion will be included in the piece that you cut out. Include the two squares to the left of it in the part you're cutting out as well. Now combine those three squares with the other two of the protruding L shape, and you will get a five-square piece! Finish cutting out this shape and you've got the answer!
Sharp solution!
A rather interesting rearrangement, eh?

Hints you open and puzzles you mark solved are kept in this browser.